PALMER Precision rebuilt and bolted flywheel.
Fits 1964-69 Corvair cars and trucks
including turbos and 140's.
This precision rebuilt late model flywheel
has been disassembled, inspected, machined
and reassembled to minimum tolerances.
This flywheel is rebuilt using
heat-treated bolts and lock nuts
in place of the original cold rivets.
Original Corvair flywheels were assembled
to an alignment specification of .020+.
This unit has been aligned
to .005 for axial (edge) runout
and .008 or less radial (face) runout.
Finally, this flywheel has been dynamically balanced
in steps up to 3500 RPM.
NOTE: it is highly recommended
that any pressure plate be balanced when used
with this rebuilt flywheel before installation.
Imbalance issues such as vibration
are a direct result of an unbalanced pressure plate.
$50.00 CORE CHARGE INCLUDED IN PRICE
Please return your rebuildable
within 30 days.
You will be issued a refund of $50.00
when we recieve your old flywheel.
No rusty, welded or bolted flywheels accepted.
Check yours before sending!